1
of
3
Rolyan Watercolorsᵀᴹ Perforated Thermoplastic Splinting Material
$7039
Unit price
/
Unavailable
This is an item typically not stocked in our warehouse. This item is still available but
will require an extra lead time that can vary depending on supplier. Please contact us at
anytime to learn more.
Rolyan Watercolorsᵀᴹ Perforated Thermoplastic Splinting Material - 13% Ultraperf / 1/16" x 18" x 24" (Single Sheet) / Charcoal is backordered and will ship as soon as it is back in stock.
Description
Description
Shipping Information
Shipping Information
Rolyan Watercolorsᵀᴹ Perforated Thermoplastic Splinting Material
From
$7039
Unit price
/
Unavailable
Product Information
Reviews
Watercolors™ is identical to Aquaplast-T™ but is offered in a variety of bright and metallic colors to improve patient compliance. As part of the Aquaplast family, Watercolors features a balance of conformability with a moderate resistance to stretch, giving clinicians more control over how much the material stretches during splint fabrication. With 100% memory, the material “remembers” its original shape when reheated and returns to it, allowing for repeated reheating and reshaping for splint revisions. It is also the only material family that becomes translucent when heated, helping the clinician identify landmarks for positioning and pressure points to provide maximum comfort for the patient.
Handling
Resistance to stretch: Moderate
- Controlled stretch and the ability to be handled with moderate pressure.
- It will not stretch out of shape when removed from splint bath.
Conformability: Moderate/Maximum
- Conforms to surface contours and detail when applying minimum force.
- Moderate degree of drape.
Memory: 100 percent
- When reheated, the material “remembers” its original shape and returns to it.
- Allows for repeated reheating and reshaping for splint revisions.
Bonding: Coated
- Create a temporary bond by pinching together heated material; however, it will come apart when cooled.
- Form a permanent bond by scrubbing off the coating or removing it with a bond solvent.
Hardened Splint
Rigidity: Moderate/Maximum (59.2 kpsi*)
- Retains shape without reinforcement.
Surface: Smooth
- No unwanted fingerprints or markings.
Indications
Splinting materials are intended to be used for fabrication of custom-molded rigid splints, orthoses, and adaptive equipment.
Best uses include:
- Thumb spica splints
- Finger splints
- Hand splints
- Wrist splints
- Elbow splints
- Dynamic splints
- Foot drop splints
- Clamshell splints
- Splints for spasticity
- Carpal tunnel splints
- Pediatric splints
- Splints for arthritis
- Splints for burns
- Back supports
- Knee splints for immobilization
- Shoulder splints
- Foot orthotics
- Ankle stirrup splints
- Adaptive equipment
- Static progressive and serial static splints
Care & Cleaning
Store at temperatures between 40° and 90°F (4° and 32°C) and less than 65 percent relative humidity. Avoid prolonged exposure to light, especially ultraviolet. Avoid exposure to corrosive and ethylene oxide fumes.
Formed splints will lose their shape in temperatures over 135°F(57°C) and should be kept away from sources of heat such as ovens, hot water, and car windows.
Clean splint with soap and lukewarm water. Allow splint and straps to dry thoroughly before reapplication.
